facebook pixel Septic Systems | HomeTips
Select Page
url is http://dev.hometips.com/category/plumbing-fixtures/septic-systems

What to Do If a Septic System Fails

Follow these steps if your septic system is failing:

• First, call your local health department. Health department staff members have the expertise to assess your situation quickly and offer advice on how to cure the problem.

• Have your septic tank pumped. Frequently, this will help the problem temporarily. The empty tank can hold several days of waste. (This won’t be effective if a clog exists between the house and the septic tank, or if very high water levels are the cause of the problem.)

• Conserve water. This is particularly effective if your system has not failed completely. lt can help lessen the problem for a short time. Water-saving devices and reduced consumption, especially in your bathroom, can have a significant effect.

• Fence off the area. If liquid waste is seeping to the surface, prevent people and pets from getting in contact with the effluent.

In many cases, redesigning and replacing the system in a new location is the only practical long term solution. This type of work should be completed only by a qualified contractor. Local health department permits are required before construction can begin. The chemical cures sometimes advertised are ineffective remedies for severely damaged systems.

Other solutions may be of help in certain situations, including:

• Increase the size of the absorption field. This will help if the original field was too small for the size of your family or if the soil does not allow water to percolate very well.

• Conserve water in your home on a long-term basis. The smaller the amount of water flowing through your system, the longer the system will last. For systems that perform marginally or leak nutrients into nearby lakes and streams, this is a good alternative.

• If periodically saturated soils are a main cause of problems, consider installing perimeter drains. This system involves installing tile drains underground at a specified distance around the absorption field to help lower water levels. This works in some but not all situations and requires the assistance of a qualified contractor. Your system’s location should also be evaluated by your local health department.

• Connect to a community sewage system, if one is available. Although the long-term costs may seem high, the benefit of reduced worry is often worth the price.

• If septic system failures are common in your area, consider participating in the development of alternatives. There are systems designed for small communities and some rural areas that are generally much more cost-effective than large sewer systems.

Get a Pre-Screened Local Septic System Repair Pro

Septic System Failure

A septic system should effectively accept liquid wastes from your house and prevent biological and nutrient contaminants from getting into groundwater, wells, or nearby lakes and streams. When this does not work correctly, the system is failing.

For example, when waste backs up into your home or liquid is bubbling up in your backyard, the system has failed. If significant amounts of biological or nutrient contaminants reach your well or surface waters, the system has also failed, even though it may appear to be working.

Most septic systems will fail sometime. They are designed to have a lifetime of 20 to 30 years, under the best conditions. Eventually, the soil around the absorption field becomes clogged with organic material, making the system unusable.

Many other factors can cause the system to fail well before the end of its ‘natural’ lifetime. Pipes blocked by roots, soils saturated by storm water, crushed tile, improper location, poor design or installation can all lead to major problems.

But by far the most common reason for early failure is improper maintenance. When a system is poorly maintained and not pumped out on a regular basis, sludge (solid material) builds up inside the septic tank and then flows into the absorption field, clogging it beyond repair.

Dangers of a Failing Septic System

The most serious effect of a failing system is the potential for serious disease from the leaking and improperly treated waste.

Dysentery and hepatitis can be spread by these wastes.

In addition to the diseases themselves, mosquitoes and flies that spread some illnesses can breed in areas where liquid waste reaches the surface.

Chemical or nutrient poisoning can also be a problem.

Many of the synthetic products you use around the house, such as strong cleaning products, can be poisonous to humans, pets and wildlife if they travel through soil to your well or on the surface to lakes, streams or ponds.

Excess nitrate levels in drinking water can pose serious health threats to infants. The health of plants around your home can be seriously affected, too.

The waste from failing systems can kill many species or cause increased growth of undesirable plants.

The economic costs of failure are no less important. The most obvious effect is the direct expense of replacing your septic system. This could cost $2,000 to $4,000.

Also consider the indirect cost of losing the use of your house while the system isn’t working and the long-term inconvenience of a system that doesn’t operate properly.

Get a Pre-Screened Local Septic System Pro

Article courtesy MSU Extension

How a Septic Tank Drainfield Works

It’s the job of the drainfield to disperse a septic tank’s effluent. Many drain systems have a series of trenches that branch out from a distribution box. Some have a single, larger bed; a seepage pit; or a similar means of distributing tainted water back into the ground (the right one for your home depends on local codes, conditions, and practices).

The type and layout of the drainfield is designed according to the absorption qualities of the soil. To gather information on how readily the soil will absorb water, a soils engineer or septic contractor conducts ‘perk’ (percolation) tests by digging holes in several places in the yard and filling them with water.

A conventional gravel-and-pipe drainfield begins with a level-bottom trench located from 1 to 3 feet beneath the ground, but at least 2 feet above the groundwater table. A perforated drainpipe is centered along the trench over 6 to 12 inches of gravel and then covered with a few more inches of gravel. A silt barrier’a synthetic fabric’ covers the gravel and pipe to help keep out silt and soil, then the trench is backfilled with soil. Once effluent reaches the drain system, the gravel and soil act as a natural filter to strain and remove harmful bacteria, viruses, and other toxins so the water is clean by the time it reaches groundwater sources.

A newer type of drainfield system, made by Infiltrator Systems, utilizes a series of lightweight plastic chambers instead of pipe and gravel; these are easy to use and treat more water with greater efficiency. A 3-foot-wide trench is dug, then the 3-by-6 1/4-foot ribbed sections are fitted together along the trench. A special end plate is added to the end of each run, the inlet pipe is inserted, and the trench is backfilled.

Get a Pre-Screened Local Septic System Pro

How a Septic Tank Works

A diagram and helpful explanation on how a home septic tank works, with information on the septic drainfield, and how to deal with septic tank failure problems.

A septic tank separates and processes wastes. From the waste water that flows into the tank, heavy solids settle to the bottom, forming a layer of sludge. Greases, oils, and lighter solids rise to the top, creating a layer of scum. The area between these two layers is filled with liquid effluent that can flow through the outlet pipe to the drainfield system.

How a Septic Tank Works (Wikipedia)

Inside the tank, anaerobic and facultative micro-organisms feed on the solids in the sludge and scum, breaking down their volume. This process creates gases–carbon dioxide, hydrogen sulfide, and others–that exit through the vent stack at the roof.

Because only a portion of the sludge and scum are broken down (about 40 percent), a septic tank must be pumped periodically. Otherwise, accumulated solids fill the tank and are forced out into the drainfield, where they hinder the soil’s ability to percolate.

A tank is usually sized according to the number of bedrooms in a house and will typically store solids for three to 12 years. The tank should be watertight–built so that groundwater cannot leak into the tank and seepage cannot leak out. If there is water intrusion coming into the tank from groundwater, it will raise the dissolved oxygen level in the tank, which will inhibit the biological treatment and lead to early failure of the drainfield.

Get a Pre-Screened Local Septic System Pro

Septic Tank Care & Maintenance

Expert advice on how to maintain a home septic tank, with advice on how to prevent and repair septic tank failure problems.

It pays to take care of your septic tank. When not maintained properly, the necessary bacteria in the system can be destroyed, causing the biological machine to shut down. Then, sludge builds up and is pushed into the drainfield, where it clogs up the system. Before you know it, you have a sewage backup and a major headache.

Periodic pumping is a critical part of septic tank maintenance. Photo: Darr’s Cleaning

The tank can be pumped out, but the drainfield cannot. After several tank pumpings on a too-frequent basis, you may discover that you have to install a new septic system at the cost of several thousand dollars. With proper care, a system should last more than 20 years.[GARD align=”left”]

It’s important to know where your tank is located, both so it may be inspected and pumped, and so that you can avoid driving over the tank or leachfield with heavy equipment or doing other work that might damage the system. If you don’t know where it is, you may be able to obtain records from your town or city hall. Otherwise, you can hire a septic contractor, who may find it with an electronic detector or by probing the soil with a long metal rod.

Once you’ve located your septic tank, make a map that shows its location and put the map where you’ll be able to find it in the future. It also helps to mark the tank’s location with a stake or stone that isn’t likely to be moved.

Have your tank inspected by a septic tank professional every three to five years—more frequently if your family uses a lot of water and a garbage disposer. You can reduce the strain on your septic system by using less water and staggering showers, clothes washing, bathing, and other heavy usage.[GARD align=”left”]

Be aware that what you flush or wash down the drain can damage the system. Don’t flush dyed or heavy toilet tissue or paper towels, feminine hygiene products, condoms, or disposable diapers.

Though some disinfectants, ammonia, and cleaners are not likely to significantly damage a system, avoid washing quantities of chemicals—particularly chlorine bleach—into the system. Never pour chemical drain cleaners, solvents such as paint, motor oil, pesticides, poisons or chemicals into drainpipes. Minimize use of a garbage disposer and don’t put fat, grease, or coffee grounds into it.

Many commercial septic treatments meant to be flushed into the system are ineffective or can actually damage it. They can promote the flow of sludge into drain lines, clogging the drainfield. Before using such a product, check with your health department to see if it has received state approval. Periodic inspection and pumping of your septic system are the best ways to ensure it operates for many years.

Find a Pre-Screened Local Septic Tank Pumping Pro

Septic Tank Problems, Pumping & Replacement

Expert advice on septic tank problems, including how a septic tank works, and tips on septic tank pumping and replacing a failed septic tank.

septic tank problems

Typical Septic System

Although sewers serve most city and suburban homes, many homes in small towns and remote areas rely on septic tanks for on-site treatment of waste water. In fact, according to the National Onsite Wastewater Recycling Association (NOWRA), nearly one-third of the U.S. population rely on septic tanks.

For homes that utilize septic tanks, the septic system arguably may be the most important part of the inner workings—just ask any homeowner who has had septic tank problems or failure.

The septic system should responsibly remove and dispose of all waste material from the home. As an organic machine, it breaks down wastes and, when working right, safely distributes the processed effluent into a drainfield on the property.

More than 1 trillion gallons of waste flow through septic systems each year. Considering that volume, the environment and public health rely on tanks operating correctly. Malfunctioning tanks can pollute ground and surface water with dangerous bacteria. Consequently, in developing countries, this type of contamination is responsible for outbreaks of disease, including hepatitis A, typhoid, and gastrointestinal illness.

As a result, proper maintenance is essential, and a full understanding of how your septic system works can put you way ahead of the game in avoiding septic tank problems.

Below you will find information on various septic tank and septic system issues, illustrated diagrams of how a septic system works, and helpful advice on buying a new septic tank.

How a Septic Tank Works

A septic tank separates and processes wastes. From the waste that flows into the tank, heavy solids settle to the bottom, forming a layer of sludge. Greases, oils, and lighter solids rise to the top, creating a layer of scum. The area between these two layers fills with liquid effluent that can flow through the outlet pipe to the drainfield system.

septic tank diagramWikipedia

How a Septic Tank Works

Inside the tank, anaerobic and facultative micro-organisms feed on the solids in the sludge and scum, breaking down their volume. This process creates gases—carbon dioxide, hydrogen sulfide, and others—that exit through the vent stack at the roof.

The proper size of a septic tank relates to the number of bedrooms in a house. The tank will typically store solids for three to 12 years. The tank should be watertight—built so that groundwater cannot leak into the tank and seepage cannot leak out. If groundwater leaks into the tank, it will raise the dissolved oxygen level in the tank, which will inhibit the biological treatment, cause septic tank problems, and lead to early failure of the drainfield.

The Septic Drainfield

The drainfield should disperse a septic tank’s effluent. Many drain systems have a series of trenches that branch out from a distribution box. Some have a single, larger bed. Others have a seepage pit or a similar means of distributing tainted water back into the ground (the right one for your home depends on local codes, conditions, and practices).

The absorption qualities of the soil dictate the drainfield’s design. To gather information on how readily the soil will absorb water, a soils engineer or septic contractor conducts ‘perk’ (percolation) tests by digging holes in several places in the yard and filling them with water.

A conventional gravel-and-pipe drainfield begins with a level-bottom trench located from 1 to 3 feet beneath the ground, but at least 2 feet above the groundwater table. A perforated drainpipe runs along the center of the trench over 6 to 12 inches of gravel.  A few more inches of gravel cover it. A silt barrier—a synthetic fabric—covers the gravel and pipe, rejecting silt and soil, and then soil backfills the trench. Once effluent reaches the drain system, the gravel and soil act as a natural filter to strain and remove harmful bacteria, viruses, and other toxins so the water is clean by the time it reaches groundwater sources.

A newer type of drainfield system, made by Infiltrator Systems, utilizes a series of lightweight plastic chambers instead of pipe and gravel. These are easy to use and treat more water with greater efficiency. The 3-by-6 1/4-foot ribbed sections fit together and run along a 3-foot-wide trench. A special end plate caps the end of each run. You insert the inlet pipe into the main section, and backfill the trench.

Septic Tank Pumping & Care

It pays to care for your tank (see What Not to Flush, below) and invest in septic tank pumping periodically so the necessary bacteria don’t die, shutting down the biological machine. When this happens, sludge builds up and flows into the drainfield, where it clogs up the system. Before you know it, you have a sewage backup, septic tank problems, and a major headache.

pumping septic tank problemsDarr's Cleaning

Periodic pumping is a critical part of basic septic tank maintenance. This job is much more affordable if the tank is easy to find.

Because only a portion of the sludge and scum are broken down (about 40 percent), a septic tank must be pumped periodically. Otherwise, accumulated solids fill the tank and flow out into the drainfield, where they hinder the soil’s ability to percolate. Frequency of pumping depends on the size of the tank and the number of people using it. Most tanks require pumping every 3 to 5 years.

Don’t wait too long. You cannot pump the drainfield. If  the drainfield is ruined because you pump the tank too infrequently, you may have to install a new septic system at the cost of several thousand dollars. With proper care, a system should last well more than 20 years.

Where Is the Septic Tank?

You’ll need to know where your septic tank is buried for inspection and pumping, and so that you can avoid driving over the tank or leachfield with heavy equipment or doing other work that might damage the system. If you don’t know where it is, you may be able to obtain records from your town or city hall. Otherwise, you can hire a septic contractor, who may find it with an electronic detector or by probing the soil with a long metal rod.

Once you’ve located your septic tank, make a map that shows its location and put the map where you’ll be able to find it in the future. In addition, mark the tank’s location with a permanent stake or stone.

Tank Inspection

Have your tank inspected by a septic tank professional every three to five years—more frequently if your family uses a lot of water and a garbage disposer. You can reduce the strain on your septic system by using less water and staggering showers, clothes washing, bathing, and other heavy usage.

What Not to Flush

Be aware that what you flush or wash down the drain can damage the system. Don’t flush dyed or heavy toilet tissue or paper towels, feminine hygiene products, condoms, or disposable diapers.

Though some disinfectants, ammonia, and cleaners are not likely to significantly damage a system, avoid washing quantities of chemicals—particularly chlorine bleach—into the system. Never pour chemical drain cleaners, solvents such as paint, motor oil, pesticides, poisons or chemicals into drainpipes. Minimize use of a garbage disposer and don’t put fat, grease, or coffee grounds into it.

Beware that commercial flush-down septic treatments may not work and, in fact, may damage it. They can promote the flow of sludge into drain lines, clogging the drainfield. Before using such a product, check with your health department to see if it has received state approval. Periodic inspection and pumping of your septic system are the best ways to ensure it operates for many years.

Septic Tank Problems or Failure

Take some of these steps if your septic tank continually displays problems or is clearly in full failure mode.

To Minimize the Strain on Your Septic System

• Increase the size of the absorption field. This will help if the original field was too small for the size of your family or if the soil does not allow water to percolate very well.

• Conserve water in your home on a long-term basis. The smaller the amount of water flowing through your system, the longer the system will last. For systems that perform marginally or leak nutrients into nearby lakes and streams, this is a good alternative.

• If periodically saturated soils are a main cause of problems, consider installing perimeter drains. This system involves installing tile drains underground at a specified distance around the absorption field to help lower water levels. This works in some but not all situations and requires the assistance of a qualified contractor. Your system’s location should also be evaluated by your local health department.

• Connect to a community sewage system, if one is available. Although the long-term costs may seem high, the benefit of reduced worry is often worth the price.

• If septic system failures are common in your area, consider participating in the development of alternatives. There are systems designed for small communities and some rural areas that are generally much more cost-effective than large sewer systems.

To Deal with Septic Tank Failure

• First, call your local health department. Health department staff members can expertly assess your situation quickly and offer advice on how to cure the problem.

Periodically pumping out the septic tank keeps the septic tank operating properly.

Periodically pumping out the septic tank keeps the septic tank operating properly. Most tanks can go 3 to 5 years between pumping.

• Have your septic tank pumped. This will help the problem temporarily. The empty tank can hold several days of waste. Pumping won’t solve a problem created by a clog located between the house and the septic tank. Neither will it help if very high groundwater levels are causing the problem.

• Conserve water. If your system has not failed completely, using less water can help lessen the problem for a short time. Water-saving devices and reduced consumption, especially in your bathroom, can have a significant effect.

• Fence off the area. If liquid waste is seeping to the surface, prevent people and pets from getting in contact with the toxic effluent.

Tips for Buying a New Septic Tank

Polyethylene septic tankNorwesco

Polyethylene septic tank features two manholes and comes piped, ready for hookup. It’s light enough to be picked up by two men.

In many cases, redesigning and replacing the system in a new location is the only practical long term solution to chronic septic problems. For this type of work, hire a qualified septic contractor. Local health department usually require a permit before construction can begin.

As explained above, a septic system is a self-contained water-recycling system. Located underground in the yard, a watertight tank receives and stores wastes from the house. Bacteria in the tank decompose the waste, sludge settles in the tank, and effluent flows into the ground through a drain system. The effluent eventually filters back down to groundwater sources.

A septic system consists of a waste pipe that is connected to the house’s drain-waste-vent system, a watertight septic tank, and a drainfield (or “leachfield”) or other subsurface infiltration field such as a seepage pit or a leaching chamber.

Codes dictate the minimum distance a tank and drainfield may be located from the house or a well and the size and makeup of the tank and drainfield.

To prevent overloading the septic tank and drainfield, runoff from the roof and foundation drains and other ‘clear’ water is usually routed to a separate drain or seepage pit. Where codes permit, it’s a good idea to route water from washing machines to such a pit, too.

Get a Pre-Screened Local Septic System Pro