When putting on a new roof in a region with cold winters, it’s smart to install a special membrane called an “ice shield” beneath the shingles along eaves to prevent ice-dam water penetration (talk to a roofer about what installing one of these on an existing roof entails).
Here’s how to prevent ice dam problems:
1Check and, if necessary, improve the attic ventilation to minimize the thaw/freeze cycle. Cold air should be able to circulate from eave vents to ridge or gable vents, minimizing temperature variations on the roof. Be sure the soffit vents are not blocked by insulation. If the underside of the roof is insulated, be sure the insulation is held back from the surface by at least 1 inch for air circulation.
2Improve the ceiling insulation to help keep heat from leaving the rooms below during winter.
3As a last resort, install electric heating cables made for this purpose along the section of roof above the overhangs. These melt enough of the ice to provide an escape route for runoff.
If damage has already occurred, take photographs and check with your insurance company regarding coverage. Then, immediately remove as much snow from the eaves as possible, or call a roofer to handle the job.
Featured Resource: Find a Pre-Screened Local Roofing Contractor
Call for free estimates from roofing pros now: