facebook pixel Advice for Do-It-Yourselfers | HomeTips
Select Page
url is https://dev.hometips.com:443/category/workshop-tools-garage/advice-for-do-it-yourselfers

First Steps for Do-It-Yourselfers

Are you considering jumping headfirst into a major home DIY project? If you are, take a moment to consider a few important preliminary steps. Home improvements can be like a Chinese puzzle in complexity, with interlocking parts that must proceed in exactly the right direction and order or it simply doesn’t work. Planning is key. It’s critically important to be clear about your goals and to develop a plan for achieving them.

Whether you’re adding a room, building a deck, or installing new cabinets, spending a little extra time planning before you actually launch your project can make the process much smoother- and your results far more successful.

Here are seven steps that are key to proper planning:

1Set your priorities. Break down the various elements of your plans and rate the importance of each. Most people want fast, inexpensive, high quality results. As a rule, you can pick two of these. If you want it fast and inexpensive, chances are pretty good that it won’t be high quality. If you want it fast and high quality, chances are it won’t be inexpensive. And so on.

2Estimate the cost. Nothing is worse than halting progress halfway through a project for lack of funds. To accurately anticipate costs, you’ll have to do some homework. Begin by visiting a home center to find out what the materials and fixtures will cost. In addition, it’s a good idea to get three bids for the work from contractors or other professionals, even if you plan to do some or all of your own work. Getting bids can give you a feel for what the work will involve and help you determine the potential savings of doing it yourself. In some cases, looking at the numbers may convince you it’s wiser to hire a professional.[GARD align=”left”]

3Plan for any help you’ll need. Even when you do it yourself, you don’t have to do it BY yourself. Some jobs take two or more people to do safely and properly. Before you encounter those jobs, schedule help.

Keep in mind that most home improvements involve a range of different tasks, each requiring knowledge and skills, from design and construction to plumbing, wiring, and finish work. Your overall project might go far more smoothly if you hire a pro for certain parts. For example, when remodeling your kitchen, you might want to install the flooring and cabinets yourself but bring in a plumber for installing new piping.

If you do call a professional, make sure he or she is qualified and reliable. The best way to find good help is through personal recommendations. Otherwise, you can find qualified, pre-screened professionals on the Web through services such as HomeAdvisor: Get a Pre-Screened Local General Contractor.

4Gather your tools and resources. Before you begin, make sure you have on site the tools, materials, and other resources you’ll need to complete the work. If your current toolkit doesn’t include certain specialty tools, explore renting them. Key materials, fixtures, and appliances–such as tile, windows, cabinets, and plumbing fixtures–should be scheduled for delivery. Far too many people plunge into demolishing their old kitchen only to find that their new cabinets have been back ordered for delivery in twelve weeks.

5Explore the need for a permit. Visit your city or county building department to find out whether permits are needed and to discover any zoning or building requirements. Be sure the changes you plan to make are possible and legal before getting too far into planning. Chances are good that any room addition will be governed by setback and zoning limitations. If you intend to do your own work, be sure your town allows this. Some cities, for example, require electrical and/or plumbing work to be completed by a licensed professional.

In most areas, permits are required for work that affects the structure of a house or that involves changing electrical wiring or plumbing. You probably need a permit if you intend to alter the roofline, move a bearing wall, or reposition plumbing fixtures. You may not need one for installing new floor coverings, replacing doors and windows, or making minor repairs. If a permit is required, don’t proceed without it.

6Establish a timeline. Carve out a block of time that is long enough to get the work done, and then set mileposts for completing phases of the work. Be aware that doing your own work will probably take you longer than you expect-in fact, it’s likely to take you twice as long. Within your timeline, account for the delivery time of anything that must be special ordered.

7Set up your systems. It’s usually a good idea to rent a dumpster and have it delivered before any major demolition begins; coordinate delivery with start-of-work so you don’t pay excessive rental fees. If contractors or other professionals will be involved in the project, set up a meeting to discuss logistics and the work that needs to be accomplished. This is also a good time to establish daily schedules and ground rules such as work hours, use of bathrooms, and so on. Be sure to ask for cell phone numbers for all of the key players.

Home Improvement Safety

Home-improvement projects often call for risky practices. I remember nailing siding onto my house from the top of a 30-foot scaffold. That one got my blood circulating. Then there was the Habitat for Humanity house building project where we tight-rope-walked across the tops of 2-by-4 stud-framed walls while carrying roof trusses.

A hardhat is much cheaper than brain surgery. If you’re working beneath construction, get one!

Accidents can happen. You need to be especially careful when you’re working at heights; with power tools or sharp blades; with heavy, awkward, or toxic materials; or with electricity or natural gas. Think about the Big Picture: It simply isn’t worth it to do your own home improvements if you run a high risk of seriously injuring yourself.

By employing proven safety techniques, you can greatly reduce your risk of danger or injury. Here are a few very important practices and rules:

• Tackle only those tasks that you feel safe handling. For example, if you’re uncomfortable on the roof because it is too high or steep, leave the roof repairs to a professional. The same holds true with jobs that require specialized tools.

• Keep a tidy work area to avoid creating your own hazards. Don’t allow power cords to tangle. Pick up and properly store power tools, sharp tools, or dangerous materials that might cause injury. Pull all nails from old lumber.

• Keep tools and supplies away from the reach of small children. For more about child safety, see Childproofing Your Home.

• Dress for safety. In other words, don’t work in your flip-flops and shorts. Sturdy clothing, work boots, and gloves will protect you. And wear safety glasses whenever you use power tools, hammers, or other striking or cutting tools. If you’re going to be working beneath construction, get a hard hat.

• Read the owner’s manual! When using power tools, be sure to follow all precautions stated in the manual. Always unplug the tool before servicing or adjusting it and when you’re finished with the task at hand. Be sure the tool works properly and is equipped with proper safety guards.

• Keep drill bits, blades, and cutters sharp. Dull tools require extra force and can bind, making the tools dangerous.

• Protect electrical tools with GFCI receptacles. When working with corded power tools outdoors, be sure they’re plugged into a receptacle that is protected by a ground-fault-circuit interrupter (GFCI). In the event of a short, a GFCI will shut off the circuit instantaneously.

• When using a ladder, position it on a flat, firm surface. As you climb or reach, keep your weight centered. Do not lean out to one side; keep your hips between the rails; never stand on the top two rungs. When using an extension ladder to reach the roof, extend at least two rungs above the eaves. This way, you can hold onto the ladder as you step onto the roof.

• Don’t go up on the roof in bad weather or if your roof has a pitch steeper than 5 in 12. Pitch expresses the angle of a roof’s slope. To find a roof’s pitch, measure how many inches it rises vertically for each 12 inches of horizontal “run,” or distance. A 6-in-12 pitch rises 6 inches vertically for every 12 horizontal inches of run.

• Do your own electrical work only if you have the necessary knowledge. Be sure to shut off the power before working on a circuit. Use a circuit tester to make sure a circuit is not active after you have shut off the power. (Sometimes more than one circuit is wired through an electrical box.) Never work on a live circuit, fixture, outlet, or switch. For more about shutting off the power, see How to Turn Off Your Home’s Electricity.

• Think twice before working on gas pipes. This is a job that’s usually best left to a professional technician. If you have the know-how to do your own work, test for leaks by brushing a solution of soapy water onto connections. Escaping gas will create bubbles. Remember that gas is explosive! Never use a flame (or a match) to test for leaking gas.

• Equip your garage or workshop and your home with fire extinguishers. Every home should have two working A-B-C fire extinguishers. Be sure they’re large enough to handle home fires; they need to be rated a minimum size of “2A10BC” on the label. Periodically check them to be sure they are fully charged.

• Protect yourself against exposure to hazardous chemicals and materials. Many varnishes, strippers, solvents, preservatives, adhesives, and other products used to accomplish projects contain hazardous ingredients. Pay attention to all label warnings, including instructions about proper ventilation. For some materials or situations, a certified respirator is a must.

• Dust and fibers can be hazardous to breathe. When sanding wood or wallboard joint compound, wear a dust mask. Never sand, scrape, or dislodge surfaces that you suspect to contain asbestos; doing so can put highly hazardous fibers into the air. For a complete report on how to identify asbestos and deal with this hazard, see Asbestos Testing & Removal.

• Know how to handle lead-based paint. Test surfaces before sanding or stripping. (Test kits are available in most home-improvement centers.) Before removing even a small quantity of lead-based paint, seal off the work area with duct tape and plastic sheeting. Always wear a respirator, gloves, and protective clothing. Vacuum the area only with a particulate vacuum cleaner designed for the job (these can be rented). Pregnant women and children should not be in the house or at the work site until all dust is removed. Hire a professional to strip large surfaces covered with lead-based paint. For more about lead paint, contact the Environmental Protection Agency.

• Last but not least, keep a good first-aid kit on hand. You can buy a first-aid kit that is endorsed by the American Red Cross at The Red Cross Shop.